If a person thinks about how to improve the climatic conditions in his home, office, then there will be a dilemma about what is better - air conditioning or a split system. This happens because each of these types of equipment has both its advantages and disadvantages - that is, there is no ideal option.
In the article we proposed, design features and the principle of operation of climatic equipment are described in detail. To facilitate the process of evaluating the positive and negative sides, we presented the characteristics in comparison. Our recommendations will help you make the right choice.
Equipment selection guidelines
At their core, air conditioners and split systems are two varieties of one type of popular climate equipment. That is, they are designed to solve the same problems, while the principle of their action is similar.
And the only difference is that the air conditioner is monoblock, that is, its body is one unit, and each split system offered to customers consists of two parts. Moreover, they are always placed in different places - one of them is installed outside the heated room, and the second inside.
Since the functionality of monoblock models and split systems is similar, all of them are able to effectively cool the air in a residential, working and any other, relatively small, room. At the same time, air is drained. It is necessary to ensure sufficient comfort in the room, to prevent the development of bacteria.
The wall-mounted indoor unit of the split system ensures even distribution of warm air
In addition, today, versatility has become an important feature of air conditioners, split systems. As a result, heating with concomitant drainage may not be the only function available to the user. Therefore, anyone can buy a unit that additionally carries out ventilation and filtration.
Nevertheless, one should know that the listed functions in both varieties can be considered no more than additional. Since there are a number of operational limitations. For example, the ventilation mode is best used only in the winter, if warm air accumulates at the top and is cold on the floor.
Filtration often allows you to fight only with dust, but more and more manufacturers equip their products:
- ionizers - designed to destroy bacteria, purify the air of odors, other contaminants;
- fine filters - they serve to clean the air of various allergens, mold, etc.
But only air conditioners belonging to the most expensive category, which are not available to everyone, can still be compared in terms of efficiency with air purifiers.
The market has the most models related to split systems. You can install this technique in the room of an apartment of a multi-storey building, a cottage or a country estate
And yet all models related to these types of equipment are household. That is, they are used to cool apartments, small shops, restaurants, private houses, offices. For processing air in large rooms, units of a completely different class are used, which are considered professional.
Varieties of modern air conditioners
If a potential buyer needs to understand what is better - a monoblock air conditioner or a split-system consisting of several parts, then you should start by familiarizing yourself with the types of this equipment. And a lot of them have been created for convenience.
Split systems are further divided into:
- cassette - mounted in the inter-ceiling space, belong to the group of equipment with an influx of fresh air;
- channel - they are installed between the main and false ceilings and allow you to cool the air in several necessary rooms at once;
- wall mounted - the name indicates the main feature;
- floor - unlike all kinds of wall models, they allow you to avoid the effects of direct air flows on people in the room. In addition, this type of equipment more evenly distributes chilled masses, which is a significant plus.
Channel units feature of their work are due to channels divorced from rooms located nearby. These are ordinary corrugated pipes, with the help of which warm masses are selected and cold ones are delivered. The equipment allows for the conditioning of a multi-room apartment, a large office, and more.
If there is a need to process air in several rooms, then it is logical to use efficient multi-split systems. Their feature is that any number of internal units is connected to one external unit. Moreover, they can be of different capacities, brands, located at different distances from the outside of the system.
The air duct of the channel split system is circled in red, and the indoor unit itself can be in the next room
At the same time, there is an important drawback, in the form of the same single external unit. So, if it breaks down, then the entire air conditioning system created by the owners of the premises fails.
Monoblock conditioners are divided into:
- Mobile - the most popular equipment of this type.
- Window - they have already served their purpose, so this kind of variety is presented in the lines of only a few manufacturers, not related to the top ones. The reasons for the unpopularity are low efficiency and low thermal insulation of the room, where external air enters through the design of the product.
As a result, the monoblock view for today is represented mainly by mobile air conditioners, compact and mounted on wheels. Therefore, it is convenient to move or transport them somewhere. What is their main feature.
The following article will familiarize you with an overview of the best positions in the air conditioning market, analyzing this interesting question in detail.
Comparison of the most important features
Although many common features have been listed above, the design nuances are affecting. Therefore, both varieties have a number of characteristics inherent only in their type, both positive and negative.
Performance for efficient cooling
Monoblock products are designed for air conditioning rooms with an area of 15-35 square meters. m. And the models related to split systems are more powerful, which gives them the opportunity to cope with the same work in rooms reaching 50-80 square meters. Although most of them are also designed to work in small areas.
Monoblock air conditioning fits perfectly into the interior and does not take up much space. But its most sought-after feature is mobility.
The conclusion follows from this: monoblock air conditioners should be bought only for cooling the air in small living rooms, kitchens, offices, commercial premises. Whereas split systems can work effectively in a wider range of areas. This factor is important to consider when choosing.
Noisiness is the main disadvantage
The superiority in the performance of split systems is due to the fact that the noisiest part of their design, called the compressor, is located on the street. Therefore, manufacturers can provide the models belonging to this variety, any necessary power, and without risk to reduce the comfort of living.
As for monoblock products, the compressor emitting noise is located inside the housing due to its design features, and therefore, in a residential or office building. As a result, designers are limited in their ability to increase their productivity, which leads to an increase in noise and sound pressure.
Such discomfort will interfere with a quiet life, read a book, work and will certainly harm health. This is an urgent problem, and it is reflected in the legislative acts of all post-Soviet countries.
As a result, monoblock units lose to their two-block counterparts not only in power, which is not critical, but also in noise. The last moment is fundamental for many potential buyers making a choice in favor of models of one or another type of air conditioners.
Window air conditioning is also monoblock, but today they are unclaimed, so they are rare
But a premature decision should not be made, since the noise level of monoblock air conditioners is just slightly higher than that of split-systems, but it is within the framework of common sense and various regulatory acts.
Therefore, it all depends on the personal perception of the person and it is recommended to simply make a comparison. Although a clear advantage in this regard is the dual-unit units.
Functionality: no clear leader
Split systems are often equipped with various additional equipment, for example, ionizers, effective filters, various control sensors, etc. And they have additional functions that make it possible to make work of higher quality and less energy-intensive.
Nevertheless, most often opponents of monoblock conditioners complained of such inconveniences as the need to perform condensate drain manually. In some cases, this operation had to be performed every 3 hours.
In addition, insufficient accuracy of monitoring the climatic conditions in the room was noted, which led to a mediocre quality of the established program.
But today it is no longer a rarity of models of monoblock air conditioners, devoid of the listed disadvantages. They can independently remove moisture into the heat exchanger, therefore, every few hours, you no longer need to spend time on the air conditioner.
In a one-piece air conditioner, only the duct is in contact with the outside air, which adds to the reliability of the product
And also in recent years, the quality of temperature control in the room has significantly improved, as a result of the errors of the models of leading manufacturers have become insignificant. For example, monoblock conditioners Electrolux have long had deviations within 1 ° C, which is quite decent.
If a potential buyer plans to use the equipment throughout the year, including for heating, then you should pay attention to the availability of such an opportunity. Since heating using split systems is recommended to be carried out only in the spring-autumn period, or more precisely, up to -5 ° C.
Therefore, in most cases, air conditioning will not replace the main types of heating (centralized or autonomous system).
You can ignore the indicated rule that in the worst case everything will end in breakdown when launched in severe frost. With a favorable outcome, the unit will be able to survive only 2-3 winters, which is not enough, given the cost of modern air conditioners. The reason for the short life will be increased wear of the loaded parts of the compressor.
Additional equipment will help to avoid such problems, but even it will not prevent a 3-fold reduction in power in a twenty-degree frost. This will make the system ineffective.
Monoblock air conditioners lack this feature - they are always indoors. And for heating, built-in ceramic heaters that do not burn oxygen are used.
This is a frozen external unit of a split system, this will never happen with a mobile air conditioner
As a conclusion, it can be pointed out that the buyer should take into account the following feature: the clear advantage of split systems is manifested only in the segment of the most technologically advanced, and, therefore, expensive products. Therefore, if there is money to buy a unit with the function of self-cleaning, climate control and other options, then it is better to buy a split system.
If there is no desire to spend money on all the most modern "chips", then the functionality will be of a similar level. Therefore, it will be necessary to make choices based on other advantages and disadvantages.
Reliability and mobility of devices
It would seem that structurally similar and equally functional products should have similar reliability. So it is, but the external blocks of absolutely all split systems work in a more aggressive environment, which significantly reduces the durability of these products. Nevertheless, this is a natural process and there is nothing to complain about.
The external unit of any model is rigidly attached to the external wall, and the internal to the wall, floor. It turns out that each product related to this species is purely stationary.
This is a significant difference from most monoblock air conditioners that designers install on rollers. As a result, the owner can always move him to the desired corner or even another room, if it provides for the possibility of removing hot air. That will help not only get high-quality cooling, but also save.
For example, split systems can make the climate comfortable in only one room. If you need air cooling in the adjacent parts of the building, then you need to buy additional air conditioners. But monoblock products can be transported from the kitchen to the bedroom, other rooms. True, this is not very convenient - only suitable as an economy option.
So, heat is removed from the room during operation of a monoblock air conditioner. These temporary inconveniences in space allocation should be considered.
Monoblock air conditioners also have a significant limitation in the form of a flexible hose brought out through an ajar window and a hole in the wall. This element cannot be dispensed with, as it is designed to remove hot air outside the room.
As a result, monoblock products, according to many users, are considered only conditionally mobile. Nevertheless, this is not an obstacle to their transportation to the country, when transported to another rented apartment.
Also on sale there are mobile split systems, but the insignificant volumes of their sales, as well as the reluctance of most manufacturers to engage in the development of such equipment indicate its unpopularity.
About the cost of installation work
Today, installing a split system is not an expensive pleasure. Even when there is no particular difficulty for performing this operation, you will have to part with an impressive amount equal to 20-30% of the cost of the purchased product.
You can save money by entrusting the work to non-professionals, but this is fraught, since durability depends on the correct installation, and moreover, significantly.
Installation of the external unit of the split system is a complicated procedure, therefore expensive. But saving on it is not worth it - it can turn into big problems
Owners of monoblock air conditioners are deprived of installation problems. Since it will work in any place where it is installed. But with one limitation - it is imperative to ensure the withdrawal of a flexible pipe through which hot air is transported outside the housing or office.
To do this, make a hole in the wall, window, which is also an additional cost, although in this case everything is simpler and cheaper. Replace these works with a cover made of dense polyester fabrics, such as polyester.
It is quickly and easily placed between the window frame and any of its wings, installed on ventilation. Then, a hose for venting air is attached to the hole.
This is the room where the indoor unit of any split system is installed.Therefore, it is advisable to plan the installation simultaneously with the repair
Often the owners of monoblock air conditioners get out of the situation, leading the pipe directly into the ajar window. Such a solution can only be considered temporary, because it will significantly cool the air, but with significantly higher energy costs, which is disadvantageous.
For comparison: often this is how a monoblock mobile air conditioner is “mounted”, although this is not the most economical way
In this category, despite all the limitations and difficulties, there is clearly an advantage over monoblock air conditioners. And this means that the owners of such products significantly save money at the stage of acquisition and installation of the selected unit.
The importance of design when choosing a device
Monoblock air conditioning is most often a design with a height within 70 cm, the width of most models does not exceed 40 cm.
The design of the indoor units of the split system is very diverse, as they come in different thicknesses and lengths. If necessary, you can even hide such a device. Body color is offered by manufacturers in a wide range.
The design of the internal blocks of split systems is much more diverse, this structural element can even be hidden
In practice, buyers do not differ in special claims - most often they get classic white products that easily fit into any atmosphere of housing, offices, shops. Nevertheless, it is better for a person with a special taste to choose a split system because of the wider variety of design decisions.
People living or working on the lower floors of buildings should be aware that outdoor units located in the reach of the vandals often suffer from their actions.
To avoid damage to equipment, it should be placed as high as possible, if the neighbors are not against it. Protective structures may be considered. Which implies additional costs.
How to decide on the equipment?
When it is difficult for the future owner of an air conditioner to make a choice of climatic equipment, it is necessary to take a sheet of paper and indicate on it all the necessary parameters. And then choose the most suitable type of equipment for them. Then make a choice of the model related to the desired type.
The procedure can take several steps. First you need to determine the exact area of the room, the air in which the air conditioner will cool. If it will be up to 35-40 square meters. m, then you will have to choose the desired type further.
If the area is larger, then only the split system will become the optimal solution, since it is unlikely that a person will find the necessary one-piece air conditioning.
Residents of lower floors will need to protect their property from vandals and thieves. Equipment damage is not uncommon
Secondly, the issue of noise is to be solved - it is relevant for most buyers, therefore it is not practical to put it off. Why do you have to go to retail stores, to acquaintances and compare the sound pressure indicators of different models in order to understand whether noisier monoblock products are suitable or to choose quiet split systems.
If the final choice has not been made at this point, then you need to pay attention to the desired functionality of the air conditioner. When it comes to premium features, you will need a split system.
In the absence of a desire to spend money on installation, anti-vandal products, protective visors that protect the air conditioner from moisture, you should choose a monoblock model.
If the choice is still not made, you will have to use additional arguments. For example, it might be a suitable design. You need to understand that in the case when the model should be mobile, the question of choice should end only with the acquisition of a suitable monoblock model. This applies to buyers renting housing, commercial premises, summer residents.
It is no alternative to have to abandon the acquisition of the split system to people living in buildings classified by the authorities as a historical heritage. Since spoiling their facades and other walls is not a good idea.
The possible complexity of the choice indicates that no type of equipment has clear advantages over another. This is confirmed by statistics: more often people buy split systems, but this advantage is far from overwhelming.
The video below will help potential buyers quickly figure out what type of air conditioner will be preferable for them:
In the video, an overview of the features of the compact split system:
Today, mobile all-in-one air conditioners, like split systems, are efficient equipment that can cool the right amount of air and perform a number of additional functions. And if necessary, he will do all this in automatic mode.
But each of these types has a number of advantages, disadvantages, given which potential buyers should choose the optimal model.
And what type of climate equipment did you prefer to install at home or in the country? Tell us what was the deciding factor in your choice. Please leave comments in the block below, share useful information and photos on the topic of the article.